Nov 12, 2017

Fire ExtinguishersThe CPSC website shows boaters how to easily identify recalled Kidde fire extinguishers. (Photo credit CPSC)

More than 40 million Kidde fire extinguishers equipped with plastic handles, some on the market for more than 40 years, have been recalled. According to the Amercian Consumer Product Safety Commission (CPSC), “The fire extinguishers can become clogged or require excessive force to discharge and can fail to activate during a fire emergency. In addition, the nozzle can detach with enough force to pose an impact hazard.” The BoatUS Foundation for Boating Safety and Clean water is urging recreational boat owners to check their boats for the recalled extinguishers and get a free metal-handled replacement by going to the CPSC recall website.

The recall affects both plastic-handle and push-button Pindicator Kidde fire extinguishers, including 134, ABC- or BC-rated models manufactured between January 1, 1973, and August 15, 2017. The extinguishers are red, white or silver and were sold in the US and Canada through a wide range of retailers from Montgomery Ward to Amazon. The CPSC recall website shows how to easily identify the affected extinguishers.

In the recall, Kidde also acknowledged the free replacement push-button extinguisher being sent to personal watercraft owners is similar in size to the recalled model but may not fit in the same location as the old fire extinguisher. “This may require a slightly different mounting orientation or location,” said BoatUS Foundation Assistant Director of Boating Safety Ted Sensenbrenner.”

CPSC says there have been approximately 391 reports of failed or limited activation or nozzle detachment, including one fatality; approximately 16 injuries, including smoke inhalation and minor burns; and approximately 91 reports of property damage.

Kidde may also be contacted toll-free at 855-271-0773 from 8:30 a.m. to 5 p.m. ET Monday through Friday, 9 a.m. to 3 p.m. ET Saturday and Sunday. The company offers additional recall information online at kidde.com by selecting “Product Safety Recall.”

Marine Products

  • Prev
Since its launch at the Miami International Boat Show in February 2017, Raymarine’s game-changing ...
Furuno continues to enhance its proven line of Radars technology by adding impressive Fast Target ...
Even in hot weather, large power cords are often stiff and difficult to lay out and coil; cold ...
A line of rigid clamp-style shaft adapters that come in a wide variety of configurations to connect ...
Ocean Safety, a 3Si Group company and specialists in the worldwide supply, distribution, service ...
Lighting a deck or cockpit space provides safety and security, but too often LED fixtures are large ...
November 14 at METSTRADE, Mercury Marine, the world leader in marine propulsion and technology, ...
Whether learning to sail in an Optimist, perfecting technique in a Laser or taking line honors in ...
Sulzer Mixpac USA, Inc., the leading innovator of 2-component adhesive dispensing systems, ...
Modern navigation on virtually all commercial vessels and high-end recreational yachts requires ...

DAVIS DEBUTS CARBON FIBER WIND VANES

Davis Carbon Fiber Wind Vanes

 

 

Whether learning to sail in an Optimist, perfecting technique in a Laser or taking line honors in the latest sportboat, the ability to visualize apparent wind angle and read the shifts is critical to sailing well. Traditional wind indicators tend to be fragile and easily bent or broken. Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. For Opti sailors, an equally durable, carbon-free class legal version is offered. READ MORE

 

  

Featured Articles

Featured Articles
  • Prev
The Boating Ontario Conference held in Collingwood, Ontario November 25 to 27, included a number of ...
Last night Boating Ontario presented BIC’s Andy Adams with the W.J. Robertson ...
History was made in Amsterdam, Netherlands on November 15 as Campion Marine became the first ...
Join the 3,000+ ABYC Certified Technicians around the world trained at the highest level to ensure ...
Boating Industry Canada met with Jens Bering at IBEX 2017. Bering has recently been appointed to ...
Make sure to mark your calendars for the upcoming NMMA Canada Industry Breakfast to be held on ...
Everyone is invited to join Ontario Sailing to celebrate Canada’s 150th Birthday and the sport of ...
Activity and positive energy continued throughout the conclusion of the International BoatBuilders' ...
This morning the winners of the 2017 Innovation Awards were announced during the annual Industry ...
A trio of Canadian dealers were recognized at the Smoker Craft Inc. 2018 model year dealer meeting, ...

BOATING ONTARIO RECOGNIZES BIC'S ANDY ADAMS

Andy Adams Award 400Last night Boating Ontario presented BIC’s Andy Adams with the W.J. Robertson Award. The award recognizes an individual who has demonstrated an outstanding contribution and has expressed an appreciation for the Boating Ontario Association.

This year’s Boating Ontario is special for several reasons. It is the organization’s 50th anniversary and Andy Adams, who is managing editor of Canadian Yachting as well as online editor of Boating Industry Canada, is the first member of the media to receive the honour. Notable was that the presentation itself was made by Andrew Robertson, grandson of W.J Robertson. READ MORE

  

People

People
  • Prev
“The wind is coming up. Tell the boys they can commence with the race.” Fittingly, these would be ...
BRP, a world leader in powersports, has announced that Tracy Crocker has been appointed to the ...
CMP has announced that Gerald Dyck has joined the firm to further enhance their growing portfolio ...
Lars Ljungström has been appointed to vice president of finance and chief financial officer (CFO) ...
John Alexander Roy passed away quietly at home on August 12 after a short battle with cancer. He ...
Torqeedohas announced that Greg Jung has been appointed vice president of marketing. In ...