|

Mercury Racing unveils new 150R/200R V6 outboards during the 2024 Cannes Yachting Festival

Mercury Racing 200R V6 Outboards

Sept 17, 2024

Mercury Marine, a division of Brunswick Corporation and Mercury Racing launched two new Racing outboards on the opening day of the Cannes Yachting Festival. In addition, this week Mercury also announced new color options for the 150hp FourStroke, and introduced a new mid-range Jet outboard engine.

New Mercury Racing 150R/200R

During a media event at the boat show in Cannes, Mercury Racing announced the all-new 150R and 200R outboard engines, built on a V6 platform.

The new 150R and 200R are all about torque. Displacing 3.4 liters, these V6 outboard engines are designed to deliver exceptional hole shot and acceleration without the weight of a V8. Transient Spark Technology electronically adjusts ignition timing as needed, producing additional torque for faster hole shot and acceleration. At full throttle, the 150R develops up to 6000 RPM, while the 200R tops out at 6400 rpm.

These outboards come with the full suite of the Mercury Marine’s V6 platform features, including Digital Throttle & Shift (DTS), which gives drivers precise, seamless engine control. Fuel economy also is optimized through built-in, GPS-enabled features like Mercury’s Active Trim, Adaptive Speed Control, and Advanced Range Optimization, which delivers precise fueling throughout the operating range. Where other performance outboards require 89 octane fuel, the 150R and 200R are designed to operate on 87 octane, saving money at the pump.

The 150R and 200R also are equipped with a larger, 85-amp alternator, versus competitor engines’ 44- to 55-amp output. Mercury’s built-in battery management system ensures that even with a full suite of electronics on board, owners always have enough electrical power for their needs.

“With the new 150R and 200R, we are bringing Mercury Racing DNA to our V6 outboard range. When it comes to bottom-end torque, these engines are best-in-class,” said Jeff Broman, category director, Mercury Racing. “Add the many digital features provided by Mercury’s V6 platform, and the competition cannot match them.”

The 200R is offered with two different gearcase configurations. Weighing just 469 lbs., the 200R Torque Master is designed for competitive bass boats and other performance craft in the 80- to 85-mph range. The 200R Sport Master, at 489 lbs., is built for high performance boats running at speeds of 85 mph to well over 100 mph. The 150R is available with shaft lengths of 20 and 25 inches, while the 200R Torque Master and Sport Master have a 20-inch shaft.

“In recent years, Mercury Marine and Mercury Racing have raised the bar for innovation in the outboard engine market by introducing new V8 and V10 models at the top of our range. Now, we have responded to customer demand by expanding our V6 offerings. With the 150R and 200R, our customers have a wider range of high-tech, sophisticated outboards to choose from to power their boating adventures,” said John Buelow, president, Mercury Marine.

New Mercury FourStroke 150hp Cold Fusion, Warm Fusion Color Options & All-New FourStroke 105hp Jet

Also announced this week, the Mercury 150hp FourStroke outboard is now available in Cold Fusion and Warm Fusion White in addition to Phantom Black. The new colors were added in response to demand from saltwater boaters who want to minimize the appearance of salt spray on their outboard and keep it cooler to the touch in the hot sun. In addition, this gives more owners the ability to coordinate their engine with their hull color.

Also expanding Mercury’s mid-range lineup is the all-new FourStroke 105hp Jet. This jet outboard engine, built on the FourStroke 150hp platform, delivers 105 horsepower. This puts it at the head of the Mercury jet family, which also includes the Jet 25-40hp and Jet 60-80hp. The new FourStroke 105hp Jet is the ideal solution for boaters and anglers who want to navigate safely in shallower water while still enjoying the intuitive operation and reliability of Mercury FourStroke technology.

Related Posts





The 2024 Marine Electronics Conference & Expo was a great event!

NMEA

The 2024 Marine Electronics Conference & Expo, held by the National Marine Electronics Association, (NMEA) took place September 16 to the 20th in Providence, Rhode Island. Boating Industry Canada was there for the first time and we were very impressed with what we found.

The association is very well supported and virtually any significant marine electronics company that you could name, was represented there on the Exhibitor list at the Expo as well as all being NMEA members and very supportive of the organization.

Read More




Need to Catch up on News This Week?

Every Tuesday we publish a fresh Digest with informative articles pertaining to the Canadian boating and marine industry. Stay up to date with the latest products, research and industry developments.

Missed an Issue of Boating Industry Canada News Week? If you’re looking for a specific issue, or simply want to catch up on previous issues, check out our Boating Industry Canada News Week Archives.

Not signed up for News Week? Subscribe here.



Harris Boats Launches its First All-Electric Pontoon, the Cruiser e-210 Powered by Mercury® Avator™

Harris Boats has announced the launch of the Cruiser e-210, the brand’s first all-electric pontoon. Powered by a Mercury® Avator™ 35e Outboard, the Cruiser e-210 provides the same level comfort, amenities and style the Cruiser model is known for, in addition to a more sustainable, gas-free option to explore the waterways.

Read More


Mercury Racing unveils new 150R/200R V6 outboards during the 2024 Cannes Yachting Festival

Hubbell-Marine Stainless steel outlet covers

Mercury Marine, a division of Brunswick Corporation and Mercury Racing launched two new Racing outboards on the opening day of the Cannes Yachting Festival. In addition, this week Mercury also announced new color options for the 150hp FourStroke, and introduced a new mid-range Jet outboard engine.

Read More