Lakefront Promenade Marina Completes 2-Year Infrastructure Project with Kropf Industrial

June 6, 2023

The new docks at Lakefront Promenade Marina

Lakefront Promenade Marina is located on Lake Ontario in a large, protected harbour on Mississauga’s waterfront. They have recently completed a two-year infrastructure project leaving seasonal and transient boaters with a beautiful modern 175-slip facility.

The City of Mississauga completed a condition assessment on the marina in 2017. The previous docks and infrastructure were approximately 25 years old. Given the conditions of the facility, this project was determined a priority and the City of Mississauga’s project team then began work in 2019.

Raymond Lau, the City of Mississauga’s Project Manager, commented, “With every end, there is a new beginning. And this is true for the LFP docks. The design team’s objective was to replace the aged docks and ensure current regulatory requirements were met around the floating fuel dock and its fuel lines.”

“Due to the scope of work and demand to reconstruct the docks during the off-season, the city decided to phase the project over three years to allow uninterrupted boat use.” The project was strategically planned in three phases (docks A, B and C). Site work started in March of 2020 and the project was officially completed in December of 2022. Despite facing many barriers due to the pandemic, supply shortages, scheduling delays and more, the City of Mississauga and the contractors involved were able to successfully complete each project phase on time. You can read more about the first phase of this project in detail HERE.

Rutherford Contracting was selected as the general contractor for the project through a public bidding process. Rutherford chose Kropf Industrial as the dock sub-contractor and Claybar Contracting as the fuel system sub-contractor.

Kropf Industrial is a major manufacturer of marine infrastructure and has been in business since 1977. Kropf played a leading role in this project and was responsible for designing, manufacturing and installing the floating dock system. This included the ramps, security gates, the new electrical and plumbing system on the floating docks and the waste pump-out system with a discharge line back to the shore.

A Dock 400

 Fuel Dock Close Up 400

Above Left: The entrance to A Dock – Kropf Industrial was responsible for the gates and ramps to each set of docks

Above Right: The new floating fuel dock

The previous dock system was an aluminum frame with plastic floats that was constantly being damaged by ice forces. The fingers needed to be disconnected every winter to prevent damage. Essentially, the infrastructure was nearing the end of its lifespan.

The new docks are now made of steel pipes acting as the floats, with a welded steel frame. The steel is epoxy coated with sacrificial anodes for corrosion protection. The docks are also equipped with a composite decking material.

The dock system doesn’t require any winterization other than the standard procedures for the dock utilities. The maintenance requirements for the new system are minimal. Additional features of the docks include raceways with removable covers for maintenance access, power, water and safety ladders at each slip, corner fenders and solar lights.

The new floating fuel docks have three dispensers, a vacuum pump-out system and a fabricated kiosk. The marina and the City of Mississauga have a completely brand-new marina with exceptional new features.

Jordan Kropf, Sales Manager for Kropf Industrial commented, “This project demonstrates our ability to execute and manage a multi-phase project over two years, with significant levels of complexity, and a lot of coordination between different trades and contractors. We delivered a turn-key marina, including engineering and installation, on time, with a significant portion of the work taking place during the height of the covid pandemic. The entire project team, including the City, Shoreplan Engineering, Rutherford and Claybar, worked really well together and it was that collaboration that enabled the project to be such a success.”

Boaters at Lakefront Promenade Marina are heading into the 2023 boating season full of excitement to enjoy a completely modernized facility.

For more information on Kropf Industrial visit kropfindustrial.com.

LPM Docks 400

 Docks Close Up 400

The new docks with upgraded features

Related Posts





The 2024 Marine Electronics Conference & Expo was a great event!

NMEA

The 2024 Marine Electronics Conference & Expo, held by the National Marine Electronics Association, (NMEA) took place September 16 to the 20th in Providence, Rhode Island. Boating Industry Canada was there for the first time and we were very impressed with what we found.

The association is very well supported and virtually any significant marine electronics company that you could name, was represented there on the Exhibitor list at the Expo as well as all being NMEA members and very supportive of the organization.

Read More




Need to Catch up on News This Week?

Every Tuesday we publish a fresh Digest with informative articles pertaining to the Canadian boating and marine industry. Stay up to date with the latest products, research and industry developments.

Missed an Issue of Boating Industry Canada News Week? If you’re looking for a specific issue, or simply want to catch up on previous issues, check out our Boating Industry Canada News Week Archives.

Not signed up for News Week? Subscribe here.



Harris Boats Launches its First All-Electric Pontoon, the Cruiser e-210 Powered by Mercury® Avator™

Harris Boats has announced the launch of the Cruiser e-210, the brand’s first all-electric pontoon. Powered by a Mercury® Avator™ 35e Outboard, the Cruiser e-210 provides the same level comfort, amenities and style the Cruiser model is known for, in addition to a more sustainable, gas-free option to explore the waterways.

Read More


Mercury Racing unveils new 150R/200R V6 outboards during the 2024 Cannes Yachting Festival

Hubbell-Marine Stainless steel outlet covers

Mercury Marine, a division of Brunswick Corporation and Mercury Racing launched two new Racing outboards on the opening day of the Cannes Yachting Festival. In addition, this week Mercury also announced new color options for the 150hp FourStroke, and introduced a new mid-range Jet outboard engine.

Read More