Boats are not cars

Andy Adams 2018 Edited 400

Apr 11, 2023

That certainly seems obvious when you say it, but I suspect that the vast majority of Canadians drive cars or trucks and that they equate their road driving skills to driving a boat on the water.

A lot seems the same. In many cases you are seated behind a windshield with a steering wheel in your hands. A throttle lever replaces the accelerator but that’s not a big adjustment to make. We know there’s no brake pedal on a boat and that can be a big adjustment for novice operators as they come in to dock. 

We have all seen the novice docking videos on the internet. Then, there are the trailer launch ramp “fails” that can be both hilarious and tragic. Expensive too!

It’s plain to see that driving a car is nothing like driving a boat.

If you ever attend the car show like the one in Toronto each winter, you may walk the aisles and think there is a lot of variety, but there really isn’t. The driver is always positioned in about the same place, sits to operate the vehicle with a steering wheel, accelerator and brake pedals, and for virtually every passenger car or truck, everyone is seated and wearing a seatbelt. No one is walking around. You drive between the lines on paved roads engineered to support the posted speed limits.

When you go to the boat shows or just walk around the docks this summer, stop and think about the widely varying boat sizes, engines and horsepower ratings, helm arrangements and the specific purposes for the boats. A fishing boat has little in common with a sailboat and neither has much in common with a construction barge, or a PWC. Driving each of these is a very different experience.

Last week in this column I wrote that we need ‘education not regulation’.

There are some great boating educators out there. The yacht clubs and their sailing schools do a great job of teaching people how to sail. From Junior Sailing as a child to cruising a keelboat as an adult, they cover the bases and much of the knowledge transfers up.

Unfortunately, there are limited opportunities for people to learn how to operate a powerboat and that’s where we need help. In the United States, the same as in Canada, we pay a lot of “road tax” as part of the cost of gasoline at the pump. But in the U.S., they have a funding mechanism called the Wallop-Breaux fund.

Established in 1984 thanks to legislation authored by U.S. Sens. Malcolm Wallop and John Breaux, the fund was created as a collection point for most of the excise taxes attributable to motorboat and small engine fuels as well as fishing equipment.

The monies collected from those taxes are earmarked for a variety of state and federal programs, including the preservation of boating access areas, boater safety education and fish stocking.

By nearly all accounts, Wallop-Breaux has been a resounding success since its inception. Proponents call the fund one of the most effective “user pays, user benefits” programs ever, and say it continues to be a vital resource for the industry.

If the Canadian government were to adopt the same funding strategy, we could certainly develop a provincial funding mechanism for developing a boater education and a boating education and safety program that would be truly effective.

For environmental reasons, we need to also develop bigger launch ramp infrastructure including boat cleaning to help stop the spread of invasive species and again, a funding system like Wallop-Breaux could make that possible.

Blessed with almost countless inland lakes and rivers as well as about half of the Great Lakes shorelines and thousand of miles of ocean coastline too, I think that promoting boating and Canadian boating vacations should be a key economic priority for the Federal Government. Boating tourism should be a big financial win for the governments and much of that would come from either well-to-do Canadians or vacationing Americans. The rich would gladly pay for a great experience.

We need the government to see boating differently.

Andy Adams – Editor

Related Posts





The 2024 Marine Electronics Conference & Expo was a great event!

NMEA

The 2024 Marine Electronics Conference & Expo, held by the National Marine Electronics Association, (NMEA) took place September 16 to the 20th in Providence, Rhode Island. Boating Industry Canada was there for the first time and we were very impressed with what we found.

The association is very well supported and virtually any significant marine electronics company that you could name, was represented there on the Exhibitor list at the Expo as well as all being NMEA members and very supportive of the organization.

Read More




Need to Catch up on News This Week?

Every Tuesday we publish a fresh Digest with informative articles pertaining to the Canadian boating and marine industry. Stay up to date with the latest products, research and industry developments.

Missed an Issue of Boating Industry Canada News Week? If you’re looking for a specific issue, or simply want to catch up on previous issues, check out our Boating Industry Canada News Week Archives.

Not signed up for News Week? Subscribe here.



Harris Boats Launches its First All-Electric Pontoon, the Cruiser e-210 Powered by Mercury® Avator™

Harris Boats has announced the launch of the Cruiser e-210, the brand’s first all-electric pontoon. Powered by a Mercury® Avator™ 35e Outboard, the Cruiser e-210 provides the same level comfort, amenities and style the Cruiser model is known for, in addition to a more sustainable, gas-free option to explore the waterways.

Read More


Mercury Racing unveils new 150R/200R V6 outboards during the 2024 Cannes Yachting Festival

Hubbell-Marine Stainless steel outlet covers

Mercury Marine, a division of Brunswick Corporation and Mercury Racing launched two new Racing outboards on the opening day of the Cannes Yachting Festival. In addition, this week Mercury also announced new color options for the 150hp FourStroke, and introduced a new mid-range Jet outboard engine.

Read More