Boat for breakfast? Fibreglass on the menu along UK’s southern coast

Fibreglass

July 16, 2024

The following story follows up the article published in the July 3rd edition of Marine Industry News from the UK that was re-published with permission in the July 9th edition of Boating Industry Canada News Week Digest. This story ran in the July 5th edition of Marine Industry News from the UK. – Andy Adams – Editor – Boating Industry Canada News Week Digest

The marine industry is bracing itself for an outcry as mainstream media outlets, like Sky, pick up the story that MIN reported last week. Specifically, a ‘disturbing level’ of fibreglass has been found in oysters and mussels. The public spotlight is firmly on end-of-life vessels. Dumped boats. And what the marine sector is doing about them being abandoned into the human food chain.

MIN has been advocating for change with end-of-life vessels for years, alongside Boatbreakers, a marine salvage and recyling yard, based in Gosport UK. Luke Edney, manager, reckons that anyone eating seafood in Gosport and Portsmouth has been unknowingly ingesting fibreglass for a while.

“If you’re eating locally caught seafood, you’re also eating the local abandoned boats.”

Luke Edney
“This is why it’s important for local authorities, harbour masters and owners to remove GRP abandoned wrecks to stop them making their way into the surrounding environment and ultimately the food chain.”

Edney has been involved in the research project run jointly by the Universities of Brighton and Portsmouth. That detected GRP particles in the soft tissues of oysters and mussels collected near an active boatyard in Chichester Harbour, a popular sailing destination in south England.

When Edney saw Dr Corina Ciocan on Countryfile a few years ago, he got in touch to see if he could help with her project, and ended up sending her ‘some bits of old boats for them to test’.

Fibreglass boats can disintegrate into food chain

“Boats ending up in a landfill is the lesser of two evils until there is a solution for this,” Edney says. When old wooden boats are dumped in the water, they rot away. “But fibreglass disintegrates and leeches into everything else. That’s why you can’t just sink them.”

Robert Parton, new president of British Marine, calls himself a ‘realistic tree hugger’ but says what to do with end-of-life vessels “is a huge issue. I don’t know what the answer is. It isn’t like paper where you can recycle and reuse. There’s no natural place for it [GRP].” He believes that any actions – like having a boat tax up-front to pay for recycling at a boat’s end – needs to be European or universally wide, otherwise they’ll never work. People will buy boats from other countries to avoid taxes, he says.

“Ultimately it’s the boat owner – the one who owns it now – that has to pay the cost,” Parton says. “There becomes a point where the old boat isn’t worth anything and it [recycling] becomes a cost.”

Calls for national boat register to avoid dumping GRP into water

A national boat register would help with this, allowing boats which have been dumped to be traced back to their last owner. “There comes a point where owners just walk away. Canal boats aren’t as bad because they’re made of steel which is more recyclable. . . in theory . . . but they’ve got furnishing and fittings inside them. And the value of the steel as scrap doesn’t get anywhere near the cost of disposing of the boat. It’s part of an ongoing battle. No one’s got the answer yet.

“We need a scrappage scheme like we had for cars a few years ago. That was great because it cleared up all that stuff that was worth a few quid, and people took their £1000 and got a better car. If we could create that . . . but someone has to pay for that, don’t they?”

Robert Parton
Investment is one of Parton’s key topics for a new government to consider.

“It’d be nice to help to find an answer. To make the current cruising fleet more sustainable and low carbon with better fuels is achievable, but getting rid of these old boats is a bigger pill to swallow.”

Related Posts





The 2024 Marine Electronics Conference & Expo was a great event!

NMEA

The 2024 Marine Electronics Conference & Expo, held by the National Marine Electronics Association, (NMEA) took place September 16 to the 20th in Providence, Rhode Island. Boating Industry Canada was there for the first time and we were very impressed with what we found.

The association is very well supported and virtually any significant marine electronics company that you could name, was represented there on the Exhibitor list at the Expo as well as all being NMEA members and very supportive of the organization.

Read More




Need to Catch up on News This Week?

Every Tuesday we publish a fresh Digest with informative articles pertaining to the Canadian boating and marine industry. Stay up to date with the latest products, research and industry developments.

Missed an Issue of Boating Industry Canada News Week? If you’re looking for a specific issue, or simply want to catch up on previous issues, check out our Boating Industry Canada News Week Archives.

Not signed up for News Week? Subscribe here.



Harris Boats Launches its First All-Electric Pontoon, the Cruiser e-210 Powered by Mercury® Avator™

Harris Boats has announced the launch of the Cruiser e-210, the brand’s first all-electric pontoon. Powered by a Mercury® Avator™ 35e Outboard, the Cruiser e-210 provides the same level comfort, amenities and style the Cruiser model is known for, in addition to a more sustainable, gas-free option to explore the waterways.

Read More


Mercury Racing unveils new 150R/200R V6 outboards during the 2024 Cannes Yachting Festival

Hubbell-Marine Stainless steel outlet covers

Mercury Marine, a division of Brunswick Corporation and Mercury Racing launched two new Racing outboards on the opening day of the Cannes Yachting Festival. In addition, this week Mercury also announced new color options for the 150hp FourStroke, and introduced a new mid-range Jet outboard engine.

Read More