June 6, 2023

The new docks at Lakefront Promenade Marina

Lakefront Promenade Marina is located on Lake Ontario in a large, protected harbour on Mississauga’s waterfront. They have recently completed a two-year infrastructure project leaving seasonal and transient boaters with a beautiful modern 175-slip facility.

The City of Mississauga completed a condition assessment on the marina in 2017. The previous docks and infrastructure were approximately 25 years old. Given the conditions of the facility, this project was determined a priority and the City of Mississauga’s project team then began work in 2019.

Raymond Lau, the City of Mississauga’s Project Manager, commented, “With every end, there is a new beginning. And this is true for the LFP docks. The design team’s objective was to replace the aged docks and ensure current regulatory requirements were met around the floating fuel dock and its fuel lines.”

“Due to the scope of work and demand to reconstruct the docks during the off-season, the city decided to phase the project over three years to allow uninterrupted boat use.” The project was strategically planned in three phases (docks A, B and C). Site work started in March of 2020 and the project was officially completed in December of 2022. Despite facing many barriers due to the pandemic, supply shortages, scheduling delays and more, the City of Mississauga and the contractors involved were able to successfully complete each project phase on time. You can read more about the first phase of this project in detail HERE.

Rutherford Contracting was selected as the general contractor for the project through a public bidding process. Rutherford chose Kropf Industrial as the dock sub-contractor and Claybar Contracting as the fuel system sub-contractor.

Kropf Industrial is a major manufacturer of marine infrastructure and has been in business since 1977. Kropf played a leading role in this project and was responsible for designing, manufacturing and installing the floating dock system. This included the ramps, security gates, the new electrical and plumbing system on the floating docks and the waste pump-out system with a discharge line back to the shore.

A Dock 400

 Fuel Dock Close Up 400

Above Left: The entrance to A Dock – Kropf Industrial was responsible for the gates and ramps to each set of docks

Above Right: The new floating fuel dock

The previous dock system was an aluminum frame with plastic floats that was constantly being damaged by ice forces. The fingers needed to be disconnected every winter to prevent damage. Essentially, the infrastructure was nearing the end of its lifespan.

The new docks are now made of steel pipes acting as the floats, with a welded steel frame. The steel is epoxy coated with sacrificial anodes for corrosion protection. The docks are also equipped with a composite decking material.

The dock system doesn’t require any winterization other than the standard procedures for the dock utilities. The maintenance requirements for the new system are minimal. Additional features of the docks include raceways with removable covers for maintenance access, power, water and safety ladders at each slip, corner fenders and solar lights.

The new floating fuel docks have three dispensers, a vacuum pump-out system and a fabricated kiosk. The marina and the City of Mississauga have a completely brand-new marina with exceptional new features.

Jordan Kropf, Sales Manager for Kropf Industrial commented, “This project demonstrates our ability to execute and manage a multi-phase project over two years, with significant levels of complexity, and a lot of coordination between different trades and contractors. We delivered a turn-key marina, including engineering and installation, on time, with a significant portion of the work taking place during the height of the covid pandemic. The entire project team, including the City, Shoreplan Engineering, Rutherford and Claybar, worked really well together and it was that collaboration that enabled the project to be such a success.”

Boaters at Lakefront Promenade Marina are heading into the 2023 boating season full of excitement to enjoy a completely modernized facility.

For more information on Kropf Industrial visit kropfindustrial.com.

LPM Docks 400

 Docks Close Up 400

The new docks with upgraded features

  • Prev
NEW - A sales training opportunity for the entire industry!  ALL ATTENDEES will benefit by ...
Sea-Doo cranks up the fun factor with all-new Spark PWCs and the most powerful production personal ...
Perfect Storm is proud to present: "RIDE ENGINEERING: A Multi-pronged Approach to Shock Reduction” ...
The Boating Industry Canada Employer of Choice (BICEOC) Award is the industry's only ...
Our readers will be interested in this sweeping statement of corporate strategy and evolution  ...
Land 'N' Sea invites you to join them to experience North America's largest coast-to-coast ...
Advanced Textiles Association (ATA) proudly announces the launch of the ATA Leadership Academy, an ...
The annual Boating BC Conference is set for November 21 and 22nd with Marina Night on Monday ...
The boating community is gearing up for the return of the iconic Annapolis Powerboat Show to City ...
The Ontario Ministry of Labour, Training, and Skills Development, is once again launching ...

Corporate Profile - Dometic Outdoor Global Marine Division

Dometic

Dometic Outdoor Global Marine Division is one organization that has set the bar high globally on quality standards in all aspects of its operation. From its human resources practices to its product development and manufacturing standards, the company strives for 110% in all it does. Dometic’s Vancouver, British Columbia design and manufacturing facility is the largest marine focused company in Canada. Its global standards are admirable, and our entire industry can learn from its leadership and positive practices.

In 1962, Dometic (then under the name Teleflex) developed, launched, and marketed a mechanical steering system and with its success came the first hydraulic steering in 1983 and No FeedBack Steering in ’91. 

 
Read More


 

Changing Scene

  • Prev
Taiga Motors Corporation rang the bell at the Toronto Stock Exchange ("TSX") at 9:30 AM September ...
The MRAA Educational Foundation has announced the call for nominations and applications for the ...
September 21st, we received the press announcement of Honda Marine’s all-new BF350 V8 outboard, the ...
Brunswick Corporation reported another record-setting display at the 2023 Cannes Yachting ...
Vision Marine Technologies Inc., a global leader and innovator within the performance electric ...
Raymarine, global leaders in high-performance marine electronics for the recreational boating, ...
Okanagan Lake is a picturesque glacial fjord in British Columbia, Canada. It's also home to Mission ...
We are thrilled to announce a remarkable achievement by Vision Marine Technologies at the iconic ...
Mercury Marine today introduced the Avator™ 20e and 35e electric propulsion systems. The new ...
The NMMA announced on August 23, the relocation of its headquarters to Washington D.C. as the ...

Boating Industry Canada News Week

 

Every Tuesday we publish a fresh Digest with informative articles pertaining to the Canadian boating and marine industry. Stay up to date with the latest products, research and industry developments.

Missed an Issue of Boating Industry Canada News Week? If you're looking for a specific issue, or simply want to catch up on previous issues, check out our Boating Industry Canada News Week Archives.

Not signed up for News Week? Subscribe here

 

 

 

 

 

Launchings

  • Prev
X Shore, the Swedish technology company behind a game-changing generation of fully-electric, ...
Polaris Marine has unveiled two new concept electric pontoons under its Bennington and Godfrey ...
Nuova Jolly has long stood as a vanguard in the maritime industry, carving a unique niche for ...
Highfield Boats, the leading supplier of Rigid Inflatable Boats (RIBS) in North America, will ...
With the new Hanse 410, Hanse is now launching the third model in its revolutionary new series, ...
The 10th edition of the Monaco Energy Boat Challenge (MEBC) has wrapped up at the Yacht Club de ...
This summer, the world of competitive sailing is set to witness an historic moment as the Dutch ...
Two months ago, Fountaine Pajot organized its Innovation Show in La Rochelle, France. The theme was ...
Wellcraft continues to push the boundaries of Performance Cruisers with the introduction of its ...
Sea Ray is continuing the evolution of its premium SLX Series with the official launch of the SLX ...
 

Electric Boat

The 10th edition of the Monaco Energy Boat Challenge (MEBC) has wrapped up at the Yacht Club de Monaco (YCM) and it gives a compelling look at the future of electric boating.

The MEBC was started in 2014 as a competition between university teams who built and raced boats powered only by solar power and batteries. To encourage more participation from institutions that may not have naval architecture or boat construction expertise, the YCM introduced the Energy Class competition. The club supplies the student teams with the same one-design catamaran hull, and each team adds their own cockpit and propulsion system that can be powered by any renewable alternative energy sources, not just solar.

Read More


 

 

Questus Radar Mount

Questus Marine patented, Self-Leveling Radar Mounts automatically keep radar antennas level with the horizon, eliminating target loss.

Regardless of the angle of heel, with a Questus mount, a radar antenna will pick up targets to either side of a vessel, rather than aiming to the sky and water (for planes and fish). The Questus Marine Self-Leveling Radar Mount can be installed in three basic configurations: backstay mount, mast mount or Stern Pole mount.

 

 

 

Read More


 

People

  • Prev
RAILBLAZA Ltd., manufacturer of premium quality, user-friendly electronics, fishing and boating ...
The Board of Directors of The Sailing Museum and National Sailing Hall of Fame recently announced ...
We learned from the Tuesday, August 1st, 2023 edition of the UK media outlet, Marine Industry News ...
Torqeedo, the global market leader for electric mobility on the water, announced on July 18th, the ...
On July 18th, Brunswick Corporation named Lenn Scholz president, Boston Whaler and Jeromie Johnston ...
Heather Wiczek, MarineMax Nisswa Operations Manager, was recently named to Boating Industry's 2023 ...
The Board of Directors of The Sailing Museum and National Sailing Hall of Fame have announced that ...
It is with profound sorrow that Furuno USA announces the passing of long-time employee and friend, ...
Making boating safety education more accessible by bringing courses online, growing the ...
Pace Industries, North America’s leading full-service aluminum, zinc and magnesium die casting ...

Torqeedo announces new structure and names business unit management

Matthias Vogel, Fabian Bez, Sven Mostoegl

Left to right: Matthias Vogel, Fabian Bez, Sven Mostoegl

Torqeedo, the global market leader for electric mobility on the water, announced on July 18th, the creation of two dedicated business units and named their managers. Matthias Vogel will lead the Customized Solutions unit, and Sven Mostögl will lead the Branded Retail line.

“The new Customized Solutions business unit will serve our marine industry and commercial maritime clientele with a dedicated team of experts in sales, application engineering, customer service, and after-sales service,“ said Fabian Bez, CEO of Torqeedo GmbH. 

Read More