ADDING POP-UP CLEAT CONVENIENCE ONBOARD IS EASY

Adding Pop Up Cleats

Aug 20, 2019

Many owners prefer the clean appearance and added safety of retractable boat cleats, yet may not realize just how easy an upgrade installation is. Accon Marine 202 Pop-Up® Cleats require only basic tools for mounting, enabling replacement of old bollard-style models in minutes.

Made of corrosion-resistant, marine-grade 316 stainless steel for exceptional durability, stylish Accon 202 Pop-Up Cleats push flush into the deck when not required, eliminating a common tripping hazard. Available in 4-1/2″, 6″, 8″ and 10″ sizes to suit a wide range of boats, they offer the same secure holding power as a standard cleat. The popular Accon 6″ model is shown to hold 11,400 lbs. in laboratory testing.

Each 202 Series Pop-Up Cleat comes complete with a stainless steel backing plate that doubles as an installation template. The mounting project requires only basic tools and hardware: for the 6″ cleat, it’s a drill with standard bits and a 5/8″ hole saw attachment, jigsaw, screwdriver, wrench and four 1/4″ stainless steel screws with washers and nylon insert locking nuts.
To begin, ensure there is at least 3″ of clearance below deck of the mounting location to accommodate the cleat and Pop-Up mechanism when retracted. Apply painter’s tape to the hull to protect the area from scratches.

Use the supplied backing plate to mark the cleat’s outline on the tape surface, then drill three 5/8″ holes to mark the center and ends of the cleat. A jigsaw makes it easy to finish cutting out the required opening.

With the mounting hole cut, simply place the cleat into position to check the fit, mark the four holes required for the retaining screws and remove the cleat again. After drilling out the screw holes, remove the backing tape, carefully lower the cleat into place and insert mounting screws. Position the backing plate below deck, then tighten the screws with the washers and locking nuts. A video at bit.ly/popupcleat demonstrates the process step by step, plus covers instructions for top mounting when there is no below-deck access.

Accon Marine 202 Series Pop-Up Cleats are backed by a lifetime warranty. www.acconmarine.com.

Related Posts




Recreational Marine Industry Applauds Removal of the Luxury Tax on Boats in Budget 2025

NMMA Canada

OTTAWA (November 4, 2025)—Canada’s boating industry applauds Budget 2025’s commitment to remove the devastating luxury tax on boats, a failed tax policy that unfairly punished Canadian manufacturers and workers. When the luxury tax was first implemented in September 2022, Canada’s marine industry leaders were quick to point out the impending losses of middle-class jobs, government tax revenues and sales declines.

Read More




Need to Catch up on News This Week?

Every Tuesday we publish a fresh Digest with informative articles pertaining to the Canadian boating and marine industry. Stay up to date with the latest products, research and industry developments.

Missed an Issue of Boating Industry Canada News Week? If you’re looking for a specific issue, or simply want to catch up on previous issues, check out our Boating Industry Canada News Week Archives.

Not signed up for News Week? Subscribe here.



Highfield Boats Announces New Escape Fiberglass-Hull Center Console Rib Series

Highfield Boats, America’s leading RIB brand, is proud to announce the launch the Escape Series, an all-new line of fiberglass-hull center console RIBS made in the USA. The first two models in the series, the Highfield Escape 650 and Escape 750, were unveiled during the Highfield Boats Dealer & Media Day Event at the company’s factory in Cadillac, Michigan.

Read More



RAILBLAZA AnchorPoint Phone Holder Ensures Device Safety on the Water

RAILBLAZA, manufacturer of premium quality, user-friendly electronics, fishing and boating mounting systems and accessories, has announced the launch of its AnchorPoint Phone Holder, an adventure-ready mobile device holder built for the harshest environments.

Read More